OWNER’S MANUAL
page 3
INTRODUCTION
XT-7 full range, 3 way speaker with anti-turbu-
lence rear bass reflex and ribbon tweeter
The unique XT curved design is based on a
reinforced cabinet in wooden multilayer panels to
control resonances and sound, a design where every
single element is crucial and serve the sole purpose
of achieving the best sound.
The cabinets are conveniently separated for bass
and mid/highs to enhance perfect tuning: the bass
drivers cabinet side is vented while the mid/highs is
perfectly sealed to reduce internal reflections. The
massive swallow tailed stand features adjustable
spikes and guarantees perfect stability while
completing the structure to enhance performances,
the hidden spikes can be adjusted to find always the
right balance.
XT-7 offers state-of-the-art solutions for a sound
without compromises: high quality crossover
exclusively made with all Mundorf and Clarity
components and ultra-stiff woven polypropylene SEAS
and AMT Ribbon drivers made in Germany.
TWEETER
The first Gold Note loudspeaker to feature a
ribbon tweeter, this AMT ultra-linear unit is
enhanced with a metal dampened rear chamber.
With a new custom cooling coil radiator and
dampening aluminium blocking bar designed for
resonance reduction and to increase extension
linearity.
MIDRANGES
A 160mm ultra-linear recessed driver developed with
SEAS and enhanced with a proprietary metal chassis.
The unique curved cone in ultra-hardened woven
polypropylene allows an excellent internal damping
factor while the moving parts are perfectly matched
together for a smooth and extended frequency
response.
A special radial reinforced low loss rubber surround
reduces radial resonances and prevents surround
break up at large excursions.
The custom aluminium phase plug reduces
compression due to temperature variations in the
voice coil, avoiding the resonance that would occur
between the dust cap and the pole piece while also
increasing the long-term power handling capacity.
The internal ring around the coil drastically reduces
distortion and inter-modulation.
The basket, obtained by MIM (metal injection
molding) to achieve extreme stiffness and
stability, keeps all the components in perfect
alignment.
Large windows above and below the basket's spider
are designed to reduce sound reflection, air flow
noise and cavity resonance to the minimum; the
custom spider enhances driver's excursion and give
better details and greater linearity.
WOOFERS
Using the same principles applied to Midranges, we
developed with SEAS two 180mm ultra-linear
recessed drivers.
The driver is powered by our unique curved cone in
ultra-hardened woven polypropylene to achieve great
internal damping and perfect control over the moving
parts, that are always perfectly matched to deliver a
fantastic frequency response.
To allow extreme coil excursion with low distortion, the
