Gold Note Bellagio Conquest, Owner'S Manual

Page: 45 / 52

OWNER’S MANUAL
page 44
CARTRIDGE AND TONEARM CALIBRATION
VTA SETUP
Our turntables and tone arms are always
supplied with the Gold Note Calibration Tool
to calibrate correctly the setup.
With this tool you will be able to adjust:
A Phono Cartridge alignment.
B Overhang.
C 45rpm and 331/3rpm speed (requires a
strobe light).
SPEED ADJUSTMENTS
Check the speed with the help of a strobe
light (eventually a home NEON can also
work).120,9 mm. When the speed is
correct you will be able to see the
sequence of black rectangular signs as if
they were stable and fixed while the platter
is spinning.
The outer line is to check the 331/3 rpm.
The inner line is to check the 45rpm.
OVERHANG
To set the correct overhang the Calibration
Tool must be inserted on to the turntable
record pin and the cartridge Tip must be
positioned on top of the pin.
Adjust the position of the cartridge until
the suggested overhang of the phono
cartridge is reached as indicated by the
manufacturer.
A C B