Tornado SHO
Model No. 3007, 3007A, 3007EX
Page 4
gmpopcorn.com
INSTALLATION INSTRUCTIONS
Inspection of Shipment
After unpacking, check thoroughly for any damage which may have occurred in transit. Claims
should be filed immediately with the transportation company. The warranty does not cover
damage that occurs in transit, or damage caused by abuse, or consequential damage due to the
operation of this machine, since it is beyond our control.
Setup
Your new floss machine unit is completely assembled and tested at the factory. Remove all
packing material and tape before starting operation.
1.
You MUST remove the 4 shipping brackets placed around the motor mount casting
before operation. To do so, remove the bolts that hold the brackets in; this can be done
with any wrench or socket. Failing to do so may result in damage to your floss
machine or in personal injury.
2.
Make sure the floss ribbon (heating element) located inside the head assembly has not
shaken out of the band during transportation. If the ribbon is out of the band, push it
back into place manually.
Shipping Brackets
(Remove all 4)
Floss Ribbon seen
Correctly Sitting in
the Bands
Bands
