Gold Medal G-Whiz 5908, Instruction Manual

Page: 17 / 33

G-Whiz Gas Popper Model No. 5908 and 5908GGT
Page 17
gmpopcorn.com
Lighting and Shutdown Instructions
Steps to Light the Pilot and Burner:
1. Turn the Gas Safety Valve to the PILOT position.
2. Depress the Safety Valve Button next to the safety valve handle. Hold this button down
for 30-45 seconds.
3. Light the pilot burner with a household match. Continue to hold the Safety Valve
Button for approximately 20 seconds. Release the Safety Valve Button and the pilot
burner will remain light.
4. Turn the Gas Safety Valve Handle to the ON position. The main burner will ignite.
Steps to Shut Down the Pilot and Burner:
1. To extinguish both the pilot and the main burner flames, pull the Lock Button on the
Gas Safety Valve, and turn the Safety Valve Handle to the OFF position.
2. Should the burner become extinguished because of the high-limit tripping, shut off the
gas supply until the unit cools down, then re-light.
CAUTION
If pilot is turned off, a five minute shutdown period is required before
attempting to re-light.
035_042814
Air Adjustment on Burner
After the main burner is lit, according to the directions, make any needed air adjustments in order
to get the best flame. Turn the Air Adjustment Cap (see image below) to supply more or less air. A
blue flame provides optimum heat.
Air Adjustment Cap on
burner for small poppers. Air Adjustment Cap on
burner for large poppers.