Product Features
Temperature
Indicator
Oven
Start Button
Rotor
Rotor Nut
Cam
Clamp
Tube Slot
Tray
Warming Tray
Installation
1) Plug electrical into 120 volt outlet.
2) Preheat the dispenser for 1
hour.
1) Preheat a bag of product to
between 140
o
and 150
o
F.
2) Open the door by pulling the
door from left to right and place
the product on the tray with the
spout and tube directed
downward.
3) Open the tube clamp by
rotating the cam counter
clockwise.
4) Guide the tube through the
pump slot from top to
bottom.
5) Close the clamp by
rotating the cam clockwise.
6) Close the door and cut the
remaining tubing 1/4 inch
below the door with clean,
sanitized scissors. The tip of
the tube should be visible and
extend outside of the
dispenser.
7) Depress the button to
begin operation.
Product Placement
