Econo-Floss
Model No. 3017, 3017SR, 3017SS,
Floss-Maxx
3077, and 3077C
Page 3
www.gmpopcorn.com
INSTALLATION INSTRUCTIONS
Inspection of Shipment
After unpacking, check thoroughly for any damage which may have occurred in transit. Claims
should be filed immediately with the transportation company. The warranty does not cover
damage that occurs in transit, or damage caused by abuse, or consequential damage due to the
operation of this machine, since it is beyond our control.
Setup
Your new floss machine unit is completely assembled and tested at the factory. Remove all
packing material and tape before starting operation.
1.
Lower the shipping bracket so the bell housing "floats" freely on the springs. Unscrew
and push down the two knobs on each side of the cabinet top to lower the shipping
bracket completely.
2.
Make sure the floss ribbon(s) (heating element) located inside the head assembly has
not shaken out of the band during transportation. If the ribbon is out of the band, push
it back into place manually, before plugging in machine.
Shipping Bracket
Bell Housing
Floss Ribbon seen
Correctly Sitting in
the Bands
Band
