PopMaxx with
Lighted Sign
Model No. 2552-00-001
Page 5
gmpopcorn.com
Setup
This unit has been tested at the factory.
1.
Remove all packaging and tape prior to operation.
2.
Place the unit on a sturdy, level base.
3.
The Popper blower vents out the top of unit, allow adequate clearance for airflow.
4.
The popper unit has 4 glide feet preinstalled at the factory (see image below). Install a
Black Crutch Tip on each of the 4 glide feet. Firmly push the crutch tip over the glide
until it covers the glide entirely.
5.
Door knobs are shipped in the accessories pack located inside the machine. Install a
door knob with tee bolt on each popper door; install the knob with screw on the old
maid pan.
6.
Make sure kettle lead-in cord is securely plugged into unit, and twisted to lock into the
kettle receptacle.
7.
After setup, the unit should be cleaned prior to use (see Care and Cleaning section of
this manual).
Black Crutch Tip
Glide
(pre-installed
at the factory)
General image shown for reference.
