Popcorn Topping
Dispenser
Model Series 2396-00-100 (101, 110, 111, and 140)
Page 11
gmpopcorn.com
Operating the Topping Dispenser
1.
To Pump and Heat Topping -
Turn the Heat Switch (located on control box) to the
PUMP & HEAT position to activate the display light, the heater/blower (to maintain
cabinet temperature), the foil heater in the pedestal, and provide power to the
pump(s).
2.
To dispense topping -
Press and hold either of the “Red” PB Pump Switches located
on the pedestal (or remote, if equipped). If this is the first time the unit has been used,
it may take a few seconds to completely fill the tube and dispense topping.
3.
To use Heat Only -
Turn the Heat Switch (located on control box) to the HEAT ONLY
position to activate the display light, the heater/blower (to maintain cabinet
temperature), and the foil heater in the pedestal.
On the HEAT ONLY setting the pump is de-activated.
