Lighted Nacho Cheese Warmer
with
Pump
M
ODELS
#2197NL, #2197NR
AND
#2197NS
3
MAINTENANCE INSTRUCTIONS
THE FOLLOWING SECTIONS OF THIS MANUAL ARE IN-
TENDED ONLY FOR QUALIFIED SERVICE PERSONNEL WHO
ARE FAMILIAR WITH ELECTRICAL EQUIPMENT. THESE ARE
NOT INTENDED FOR THE OPERATOR.
Adequate eye protection must be used when servicing this
equipment to prevent the possibility of injury.
Do NOT immerse the equipment in water.
Unplug your machine before servicing.
LIGHT BULB & SIGN REPLACEMENT
1. Empty contents of bowl and remove.
2. Turn unit upside-down.
3. Remove the two screws that hold the retaining angle (Item 1-13).
4. Slide sign out from bottom.
5. You now have access to the light bulbs.
6. Wash retaining angle, sign covers (Item 1-11) and all interior surfaces of light compartment
before re-assembly.
HEAT ELEMENT & THERMOSTAT REPLACEMENT
1. Empty contents of bowl and remove.
2. Turn unit upside-down.
3. Remove the four bumper feet that hold the bottom plate.
4. Unfasten the screw and two nuts to remove the heating element.
5. Disconnect wires from thermostat and or heat element
6. Replace worn or broken parts, re-wire per wiring diagram and reassemble.
Summary of Contents for 2197NL
Page 8: ...Lighted Nacho Cheese Warmer with Pump MODELS 2197NL 2197NR AND 2197NS 5 PUMP PLUNGER ASSEMBLY...
Page 9: ...Lighted Nacho Cheese Warmer with Pump MODELS 2197NL 2197NR AND 2197NS 6 CABINET ASSEMBLY...
Page 12: ...Lighted Nacho Cheese Warmer with Pump MODELS 2197NL 2197NR AND 2197NS 9 ELECTRICAL SCHEMATIC...