Pralinator 2181EL, 2181ER, 2181DEL, 2181DER
4
INSTALLATION INSTRUCTIONS
Inspection of Shipment
After unpacking, check thoroughly for any damage which may have occurred in transit. Claims should be
filed immediately with the transportation company. The warranty does not cover damage that occurs in
transit, or damage caused by abuse, or consequential damage due to the operation of this machine, since it
is beyond our control (reference warranty in back of manual).
Manual
Read and understand the operator’s manual and all other safety instructions before using this equipment.
To order copies of the operator’s manual go to gmpopcorn.com or write to Gold Medal Products Co., 10700
Medallion Drive, Cincinnati, OH 45241 USA 1-(800)-543-0862.
Model Description
The Pralinator Unit is available with either right hand or left hand dump capability. For electrical
specifications, refer to the Electrical Requirements section of this manual.
Paddle and Drum Assembly
1. Slide the Pralinator paddle onto the agitator shaft and fasten in the bottom hole with a long wing bolt.
2. Finger tighten wing bolt to secure.
3. Mount the drum seal and mixing drum on the kettle bottom, and fasten with the retaining ring.
Fasten or Adjust Retaining Ring Latch
1. Open latch then fit retaining ring
over
drum and kettle
rims.
2. Place hook
in
first
slot.
4.
To adjust hook
length,
loosen nut,
adjust hook in or
out, then retighten
nut.
3.
Push clasp tight to kettle
to lock retainer in place.
Attach paddle in
lower position.
Pralinator Paddle
(fasten with wing bolt)
Mixing Drum
Retaining
Ring
Drum Seal
Kettle
Bottom
