17
PROCESS OF SAVING MEASUREMENTS USING OPTCVOW PLATINUM
ON COMPUTER
EMPTY ROOM
NOTE: Make sure analyzer is set for STI or CIS depending on your job specs.
1. After taking the measurement of the AMBIENT SOUND and the INTELLIGIBILITY
STI-PA TONE, click FILE located on the top left corner of the computer screen.
2. Click
SAVE.
3. Fill in the JOB NUMBER, JOB NAME, COMPANY, ADDRESS, LOCATION AND
OPTIONAL NOTES ABOUT THE LOCATION.
NOTES ABOUT FILLING IN THE BLOCKS OF INFORMATION
JOB NUMBER- should be unique to entire job.
JOB NAME- The name of the company where measurements are being taken.
COMPANY- Name of company taking the measurements
ADDRESS- Address of location where measurements are being taken.
LOCATION- location where each measurement is being taken within the job site.
(EXAMPLE-STAIRS)
NOTES- (EXAMPLE- TOP OF STAIRS FACING DOWN)
NOTE: Gold Lines recommendation for saving files is first create a folder
named as the company taking the measurements. Then create a
sub folder with the job number. Save all information under the job
number using the locations as file names.
4. Click
OK
5. Change file name to match location information adding the word EMPTY to end.
6. The computer screen shows the STI SCORE for the empty room.
PROCESS OF SAVING MEASUREMENTS USING OPTCVOW PLATINUM
ON COMPUTER.
OCCUPIED ROOM
NOTE: Make sure analyzer is set for STI or CIS depending on your job specs.
1. Open OPTCVOW PLATINUM software and connect DSP2B
2. Click FILE on top left side of computer.
3. Click
OPEN.
4. Change “FILES OF TYPE” from CVO FILES to STI FILES.
5. Click on the correct file from the empty room based on LOCATION.
6. Click
OPEN.
7. Click OCCUPIED BUTTON on right side of computer screen.
8. Click MEASURE (noise levels for occupied room)
9. Click FILE on computer
