Step 1: Power on GL-BTS10. The BLUE LCD flashes.
Step 2: Activate your phone's "SEARCH" function for Bluetooth devices.
Please refer to the phone's user manual for how to search for devices.
Step 3: In "SEARCH", mode you should find a list of Bluetooth devices found.
Step 4: Select the GL-BTS10 from the list.
Step 5: Enter generic pass code "0000" to associate "Pair" and "Connect"
to the GL-BTS10
Step 6: Once you have entered the pass code, you will hear a "beep' and the
BLUE LED will stay on permanently until disconnected.
Step 7: Your phone is now paired and connected to the GL-BTS10.
Step 8: When you disconnect or turn off your phone you will be in standby mode.
The BLUE LED will flash intermittently.
Step 9: When playing music a PURPLE light (i.e. red and blue) will display
Pairing procedure
Special Note :
GL-BTS10 will auto search for last paired device.
You just need to press CONFIRM in your phone to
re-connect with GL-BTS10.
If last paired is not found, GL-BTS10 will be
on standby for new device pairing
Specification
Output power : 2W X 2 RMS
Sound Respond Frequency : 150-18000 HZ
Signal and Noise ratio power amplifier > 80dB
Speaker : 40 mm diameter. Magnet-Free. 4 Ohm.
3.5 mm Line-in socket
Input power : DC-6V 500mA adapter. USB 5V