C
o
n
tro
l b
u
tto
n
s
2.
Stop paging:
In the active mode or Time out mode, pressing the same
button again to stop paging, at the same time the repeating
and the number on the LED sign will be cancelled.
3.
"Time out" Message display:
Once the option of "Time Out " message display is enable,
the button will be flash after being pressed for a certain time,
and will also send the message to the assigned location or
person as a reminder
4. Heart Beat ( anti-theft):
After activate the option of " heart beat ", the transmitter will
send heart beat signal every 15 sec, 30 sec, 45 sec, 1 minute, 2
minutes, 4 minutes or 6 minutes. The time-gap is programmable.
1.
Active mode: when the button is pressed , the light will be
turned on to enter the active mode, then the signal will be sent
and repeated, as well.
2. Stop mode: Re-pressing the button to turn off the light
represented " Stop mode ". Under the active mode or "Time Out
" mode, to press the button again can also enter stop mode.
3. Time Out mode: After repeating paging for a certain time,
the light of button will be flashing, then go to Time out mode,
Instruction for Flash Light:
In
st
ru
c
tio
n
fo
r F
la
sh
L
ig
h
t
O
p
e
ra
tio
n
