Operation & Setting
9
Number
+
Power on
Setting
How to do
During setting, if you heard sharp beep it
means setting is void. Please reset RE-300
again if so.
Command 1-4, 6: Always press
“50” as confirmation button
1+21
Program
pagers
1.
Until you hear short beep and let go, you
will see that all blue lights turn on.
2.
Place SAP-T programmer on the table
call, pressing its “number” then “50” until
you hear long beeping “b-e-e-p”. (During
programming: the light of number turns out
to red)
3.
Follow the same way until you finish the
last number of Table Call TB-A06. 4.
Reset the RE-300 and the programming is
successful.
