Automatic changeover valve type AUV-ND
Part No. 02 585 5
0
9 / 10
Cylinder replacement on the operating side
1. Close the cylinder valve
2. Loosen the connections
3. Replace the empty cylinder with a full one and connect the full one
4. Open the cylinder valve
5. Check for leaks
6. The full cylinder is available as a spare
CAUTION
The product can be damaged if the gas cylinder is moved.
Entrained liquid phase can cause the pressure to increase in the LPG system and
damage the product or the LPG system.
Do not move the cylinder while the system is in operation.
Remote display sensor for electronic remote display
NOTICE
Only in combination with automatic changeover device of type AUV.
The remote display shows the status of the gas cylinder(s) on the operating side.
Installing the remote display sensor
Use the hexagon socket on the sensor
to unscrew and remove the hex nut
for the visual indicator .
Place the sensor connection straight
on the visual indicator .
REPLACEMENT
The automatic changeover valve has a service life of about 10 years; we recommend that you
replace the automatic changeover valve before 10 years from the date of manufacture.
REPAIRS
If the measures explained above under TROUBLESHOOTING do not result in regular
START-UP, and if there is no dimensioning problem, the product must be sent to the
manufacturer for a check. Our warranty does not apply in cases of unauthorised interference.
SHUT-DOWN
Close the cylinder valve and then the shut-off devices of the connected devices. When the
system is not in use, all valves must remain closed.
NOTICE
Close all free connections in the feed lines of the LPG system tightly with a
suitable cap to prevent gas flowing out.
DISPOSAL
To protect the environment, our products may not be disposed of along with
household waste.
The product must be disposed of via a local collection station or a recycling station.
