DISPENSER PREPARATION
cover pops out of back plate. Set cover aside
for reuse.
Raise bucket to cover pump motor.
Locate dispenser and drip tray.
Lay dispenser on flat surface.
Position drip tray as shown and press its
arrow tabs into slots along bottom of back
plate.
NOTE:
Some force may be required.
Press side latches inward on both side of
dispenser to unlock bucket so it will slide
down to expose pump motor.
Once drip tray is snapped in place. Unlock
and lower bucket.
Grasp front tabs of back plate cover and pull
upward and outward until...
16.
11.
12.
13.
9.
14.
15.
10.
DISPENSER
DRIP TRAY
BUCKET
BACK
PLATE
COVER
TAB
DRIP
TRAY
SIDE
LATCH
BACK
PLATE
COVER
3