GB
10
• Attention should be given to the environmental aspects of
battery disposal.
• Batteries (battery pack or batteries installed) must not be exposed to
excessive heat such as sunshine, fire or the like.
4. Disconnect the headset from the computer.
The fully charged battery has power for up to 20 hours continuous use,
up to 300 hours of standby time.
Switching On
1. To switch on, press and hold the scroll button
till the blue
indicator lights up.
2. When the headphones are turned on, the blue indicator light will blink
slowly. The headphones will automatically search for the last paired
Bluetooth device.
For headphones already paired with a Bluetooth device.
Pairing for the 1st Time
To pair headphones that have never been paired with a Bluetooth device
before, please follow the steps below:
1. Switch on the headphones.
2. Activate the Bluetooth feature on the mobile phone or music player, and
set it search for new Bluetooth devices.
3. Short press the
button when the red/blue LED starts flashing,
until the blue indicator light flashes rapidly. The headphones are now in
pairing mode.
4. Select “G4BOEBK14” , “G4BOECR14” or “G4BOEEB14” from the list of
found devices on the mobile phone or music player. Some mobile phones
list an option to “play through headset”. Select to use the headphones.
5. If necessary, enter the passcode, “0000”, to pair and connect the
headphones. Some device also ask to confirm the headset connection
after paring.
6. The blue indicator will light up solidly after you have successfully paired
the headphones.
If no previously-paired Bluetooth device is found within 3 minutes, the
headphones will switch off automatically.
G4BOEBK-CR-EB14_IB 5L_RC_140804_grace.indb 10
4/8/14 4:04 pm