6
1. Please carefully read and retain the operation manual for future reference.
2. Remove all packaging materials, wipe all removable parts and grooves by a soft and dry cloth, then reassemble
all these parts.
3. Place the unit at a dry and even place. Keep the unit at least 15cm away from wall or surrounding objects for
normal operation.
4. Check power socket and all external power cords to meet operation requirements. Make sure the unit has been
connected with power supply before operation.
5. The unit is installed with inductor to induce filters' location. If the filters have not been properly installed, the
unit won' t operate.
6. When first switched on there will be warm air. This is perfectly normal and is due to special manufacturing
technique of the NCCO Reactor.
Information & Setup
Before Startup
For the first-time operation of the unit:
Notice
■
Please press filters with force for proper installation.
Before installing filters, please remove all packaging
material.
Simultaneously press the two buckles to open
back cover.
Open Back Cover
Remove Filter Packaging Material
Install Filters
Install NCCO Reactor, HEPA Filter and Pre-filter in
sequence into the upper HEPA Filter Frame. The
process of filters installation at the lower Frame
is the same with the process at the upper Frame.
3.1
Clicking sound should be heard indicating successful
filters installation.
3.2
After installing all filters, put the Frames into unit
and close the back cover.
3.3
Installation Steps
