GoinGreen G-wiz, Owner'S Manual

Page: 26 / 100

1.8 Seat Adjustments
VI. SEAT BELTS
Both front and rear seats of your car
have been fitted with safety belts for
maximum protection from any
inadvertent event.
Instrument Cluster and Controls
The following steps may be followed.
Step 1: Adjust the seats so you can sit
up straight.
Step 2: Pull the belt across you and
insert the latch plate into the
latch slot. Make sure the belt is
securely latched. Also check that
the belt is not twisted.
Step 3: Position the lap belt as low as
possible across your hips. Then
pull and adjust the shoulder belt
so they both fit snugly.
To unfasten the belt, press the release
button on the latch slot.
Make sure all seat-belts are properly
fastened before driving, for your
safety.
CAUTION
The Rear seat belts are static type.
Manually adjust them according to the
comfort of the occupant to fit snugly.
26
1.8 Seat Adjustments
Instrument Cluster and Controls
III. HEAD REST
The head rest can be adjusted for height
with the help of the button located on it.
To raise, pull the headrest upward to a
level most comfortable for you. To lower
it, press the button and push the head
rest down.
IV. REAR SEAT ACCESS
You can access the rear seats from both
sides of your car. To do so:
Step 1: Pull up the seat adjustment
lever of the respective front seat
and slide the seat forward.
Step 2: Recline the seat forward to
allow easy entry to the rear seat.
Step 3: Make sure the front seat is
returned back to the normal
position.
It is dangerous to drive without head
rest.
CAUTION
V. FOLDING REAR SEAT
Step 1 : To get additional luggage
space, detach the two rubber
latches located behind the rear
seat.
Step 2 : Fold the backrest forward.
Step 3 : When not required lift backrest
and push back to normal
position attaching the rubber
latches.
25