Playing Music:
The
SonaWAVE³
can play music from 3 diff erent sources - AUX line-in, SD card and
USB fl ash drive.
Using AUX line-in
The AUX line-in port is suitable for using the
SonaWAVE³
to play music from your
laptop, smartphone, MP3 player or other music device that has a headphone port.
Make sure that
SonaWAVE³
is turned ON and connected to power by way of AC,
USB or rechargeable battery. Use the included
(c) 3.5mm audio cable
to make a
connection between your audio device’s headphone port and the
(8) AUX- line-in
port
on the side of the
SonaWAVE³
. Select a playlist or audio fi le from your device
and the music will begin to play.
To adjust volume, turn the
(3) Volume knob
towards the “+” or “-“ . Adjust the sound
until it is suitable. You can also adjust volume by using the volume controls on your
audio device, just as you would when listening to headphones.
Using SD card or USB fl ash drive playback
The
SonaWAVE³
supports the playback of MP3 fi les from both SD memory cards
and USB fl ash drives.
MP3 fi les can be transferred from your computer to your SD memory card or USB
fl ash drive via your computer’s USB port. Please consult your SD memory card or
USB fl ash drive instruction manual for detailed USB connection information. MP3
fi les should be dragged to the SD memory card or USB fl ash drive and dropped into
the top-most directory. Please do not put the music fi les into any folders on your
card or fl ash drive because the
SonaWAVE³
will not recognize them. Sort your fi les
in the order that you wish them to play when using the
SonaWAVE³
. They can be
navigated in order by using the controls on the
SonaWAVE³
. After verifying that all
of your MP3 fi les are organized according to your preference, you can safely remove
the card or drive from your computer’s USB port.
Operating Instructions
continued
