Wireless you& wireless me!
Wireless speaker is automatically pairing function, please use your device enabled Bluetooth (A2DP) to
complete the pairing process at the first time when you use.
AUTO PAIRING:
Once you have paired with wireless speaker (Bluetooth received), you won’t re-do the
pairing process again next time when you want to play music. The device (Bluetooth sender) will be in
memory the wireless speakers that you have used. If you have had played many wireless speakers,
please it is noted that only
the last one speaker
does.
The first time using it.
(Passkey “ 0000” )
(Listen the signal sound during pairing process)
1. Turn on “Power” and
open “Volume
”. Manually switch to “Bluetooth” wireless audio source. (there is
a cable/wireless switcher usually back-rear or near Antenna.)
Make sure power is “on”.
Make sure switch to “Bluetooth/wireless”
audio source. Do not stay with “cable” status and, otherwise
you cannot hear any sound signal/ or music playing when wireless audio is connected.
2. Hearing
“ doo-doo!”, going into the auto pairing mode
. You should pairing speaker with your own
Bluetooth
enabled device (remote controller from Bluetooth
enabled device).
3. Once pairing completed, you will hear “bee" signal sound.
NOW YOU CAN PALY MUSIC WIRELESSLY.
“If second user’s pairing, please make sure the last one device or ex-device is not around you.”
How to obtain warranty support.
Before submitting a warranty claim, we recommend you visit the support section at
www.AccessoryPower.com
for service assistance.
To claim the warranty service please bring back speaker unit to original purchased shop/dealer
or makes a direct contact with Accessory power.
Contact info. – You can reach us directly via email
Summary of Contents for BlueSYNC XPL
Page 4: ...Instruction...