Figure 3-4: Dashboard display in Crawl Home Mode
●
The Smartscooter® will enter “Crawl home mode” when the battery level
shows no capacity bar. This indicates that batteries are at an extremely low level
and require immediate exchange, or the battery level could run out at any minute.
The Smartscooter® will have speed limitation at 25km/h and a beep sound repeats
every 20 seconds. The “RANGE” display on the dashboard shows “------” without
the mileage figure. Replace the batteries in 24 hours or before power on the
Smartscooter® motor (which come in first) if you see a battery alert when you
unlock the Smartscooter®.
●
The scooter will regain its normal performance once the batteries are replaced.
Over / under Temperature Warning
●
Extreme usage or environmental conditions might cause the battery to hit high
temperature or low temperature protection.
●
When
Temperature Warning symbol on the dashboard lights up in orange,
indicating that the battery is now over temperature. The Smartscooter® will detune
the motor output temporarily. Swap your batteries at a nearby GoStation® to
retrieve power output immediately or part the Smartscooter® and ride it later.
21
(Models with iQ System® Smart Key)
When there is no capacity bar on battery
level display, the Smartscooter® enters hibernation mode in 3 minutes
automatically when locked. Long press
”GO” button for 3 seconds after
battery exchange to unlock the
Smartscooter®. (Please see 2.
Locking,
Unlocking, Power On and Opening Trunk -
Hibernation mode)
