02
01
04
03
Special Instructions for Cosco Alpha Omega Series, Evenflo Triumph
& Recaro Car Seats on back page.
1.
Place car seat face down on floor
2.
Thread the strap with Cleats through seat belt opening in back of car seat
3.
Align two support tabs on bottom of plate with the bottom of the ribs on the
car
seat
4.
Lay the plate flat onto the back of the car seat preferably at the bottom of
the ribs. Use the bottom of the base if necessary.
5.
Insert thumbscrews in holes on the sides of plate as shown. Use highest holes
possible in order to best match seat belt opening in car seat
6.
Secure one end of strap using thumbscrew and cleat
7.
Change position of cleat in the grommet to shorten the strap if necessary by
removing and re-attaching the strap
8.
Tighten one thumbscrew and secure other end of strap and tighten as much
as
possible
9.
Retighten first side of strap
10.
Place car seat in upright position and test connection by pulling/pushing your
seat with the handle
11.
If your car seat has a tether strap, pull 10’ of strap out and pull through
telescoping handle to attach tether latch to plate handle, tighten strap
P L A C E R AT
P L A C E R AT
06
05
N O N B R I TA X
A S S E M B LY
D I A G R A M
AT TA C H I N G T O A N O N B R I TA X
C A R S E AT
