P. 9
FIG.6
FIG.6B
FIG.6A
38
FIG.6C
9
9
9
9
8
8
8
STEP 6:
•
[6 ]
Place Triangle (#23) on top of the Support Board (#10) and place both in the center of the billiard table. Then place the Table Tennis
Surface - B (#8) face up on it
.
•
[6 & 6A]
Slide one Table Tennis Surface - A (#9) onto the billiard table and gently push the end of the Surface straight while sliding it, so that the
Plastic Dowels (#38) enter the openings.
•
[6B]
Repeat the same for the other Table Tennis Surface - A (#9).
•
[6C]
To remove Table Tennis Surfaces from the table, gently straighten and pull out.
CAUTION:
Do not lift up on the Surfaces as you pull out as
this may damage the Plastic Dowels.
10
= (1)
23
= (1)
9
= (2)
10
23