Speed 2: 5500 RPM
Speed 3: 6000 RPM
Speed 4: 6500 RPM
Speed 5: 7000 RPM
▼ Battery indication
－
Remaining battery percentage (%)
▼ Charging reminding
A flashing charging logo means that the battery needs to be charged.
Cleaning and maintenance
▼ Detach cutting head for cleaning
－
Turn off the switch
· Detach the cutting head and clean. PLEASE be reminded that the clipper body cannot be cleaned
by tap water.
▼ Oil the cutting blades
Place a few drops of oil over the cutting blades as the picture shows.
▼ Refit the cutting head
Insert the tab at the end of the cutting head into the matching recess of the clipper
and push up the cutting head until it snaps into place.
Warranty policy
▼ The invoice is valid as a warranty document.
Onlinezoo e. U. Witzelsbergergasse 20/11, Eingang Schweglerstraße 56, 1150 Wien
Web:
www.onlinezoo.at
,
www.onlinezoo.eu
,
www.onlinezoo.si
,
www.onlinezoo.es
,
Email:
Hold the clipper with the
blades pointing upwards.
Use the thumb to press down
the cutting head and another
hand to catch it.
Use the cleaning brush to
remove the remaining hair
and clean the cutting head.
Then rinse the cutting head
under tap water.
EN
