Gogen TA 10300 QUAD, User Manual

Page: 56 / 92

EN - 56
Note:
1. The available network list is constantly refreshed automatically
2. When the Wi-Fi is enabled, the device will connect automatically to your configured ne -
tworks when they are in range.
3. If the unit reports “ no connection” or “ connection failed”…the most common cause of this is
that the Password was typed incorrectly. To try again, select your WIFI name, press Forge t-
turn the WIFI off and on, to start the procedure again.
4. Once you have connection the first time, you not need to go through this procedure again as
all settings and connections are now written to the unit’s software.
BLuEtooth SEttiNG
• Bluetooth on/off: Slide the Bluetooth button to the left or right.
• Rename the Bluetooth: Touch the icon to rename it.
• Detectability: Bluetooth device nearby can detect the Tabet,you can tap the name to disco -
nnect the detectability.
• Search bluetooth device: Click “ SEArCh dEviCES ” to search bluetooth device within 10m.
• Pair and connection: After detecting the bluetooth service, input the PIN code to pair and
connect.
wEB BrowSEr
On the application page, press the icon to connect to the Internet through the browser,
input the URL in the address bar .After opening the webpage , you can use finger to slip up and
down, to scan and check other part of website.