Gogen SMILEE BPS 636, User Manual

Page: 29 / 40

EN - 27
EN
To repeat all the Tracks
1. Press P-MODE/M. button on unit until the “ ALL ” shows steadily on the display, all
tracks on the USB will be played over and over again.
2. To cancel repeat play, press the
P-MODE/M.
button on unit until “
ALL
” disappears from
the display.
To repeat the folder (only for USB which contains more than one folder)
1. Press the P-MODE/M. button on unit until “ DIR ” shows steadily on the display, the
current folder will be repeated over and over again.
2. To cancel repeat play, press the P-MODE/M. button on unit until “ DIR ” disappears from
the display.
RANDOM PLAY
Press the P-MODE/M. button on unit in play mode till the “ RAN ” shows steadily on the display,
the random play will start from next track automatically. Press the P-MODE/M. button on unit
again until the “ RAN ” disappears from the display to cancel.
BLUETOOTH OPERATION
1. Press the FUNCTION/ button on unit to switch to BLUETOOTH function, the LCD will
display “ BT ” and the pair indicator will flash at high speed.
2. Turn on the Bluetooth function on the device, scan the unit “ GoGEN SMILEE 636 ” and
connect, then input the password 0000 if required, the pair indicator keep light up to indicate
connection done. Press Play to start playback.
3. Rotate the VOLUME knob on the unit or adjust the volume on the external device to
increase or decrease the music volume to your desired level.
4. Press the PAIR(BT)/TWS button to disconnect Bluetooth.
Note : The Bluetooth works best within 10 meters in open air.
TWS OPERATION
If you have two units of this model, you can connect the two units by TWS function to become
stereo output.
1. Connect the device to one of the units by Bluetooth function, this unit will become the mas -
ter unit.
2. Turn on the second unit and switch to Bluetooth mode, press and hold the “ PAIR(BT)/TWS ”
button on the second unit, then these two units will connect automatically with a sound indi -
cated that the connection is done. The master unit will show “
TWSR
” and the second unit will
show “
TWSL
”, then these two units will become stereo output.
3. Control of play, pause, next track and previous track can be done by both units. Rotate the
volume knob on each unit to adjust the volume individually.
4. To quit the TWS, press and hold the PAIR(BT)/TWS button on the second unit to disconnect.
AUX-IN OPERATION
1. Press the
FUNCTION/
button on unit to select the “ AUX ” mode.
2. Connect your audio device to the AUX IN jack on the top panel of the unit with an AUX IN
cable.(audio cable is not included)
3. Rotate the VOLUME knob on the unit or adjust the volume on the external device to
increase or decrease the music volume to your desired level.
4. Control the playback with your audio device.
MIC JACK OPERATION
Microphone input is available in all modes.
1. Connect your microphone to the 6.3 mm MIC JACK found on the top panel of the unit.
2. Rotate the
MIC VOL. +/-
knob on the unit to increase or decrease the microphone volume.
3. Press the EQ/ECHO Button to turn on or off the echo effect of the microphone.