EN - 36
PREPARATION OF THE REMOTE CONTROL
Place the remote control on an even surface and insert the supplied button cell into the remote
control as follows.
Push the button towards left
Pull the battery loader out
Insert the battery into the receptacle
Make sure the polarity matches the marks inside the component.
Insert the receptacle into the remote control.
Cell data
Battery type: 1 x CR2025, 3V
Service life: approximately 1 year (for normal use and room temperature)
Using Of Remote Control
Point the remote control towards the main unit when operating. The remote control works best
at a distance less than 5 m and at an angle of up to 30 to the front of the unit. No obstacles may
stand in the way between remote control and infrared sensor and do not place the remote
control in direct sunlight. If the remote control unit fails to work even when it is operated near
the player, replace the battery.
Notes on batteries
If the remote control is not used for a long period of time, please remove the battery from
the compartment.
Do not heat batteries or dispose of them in fires.
Do not dismantle, deform or modify batteries.
1.
2.
3.
4.
