EN - 47
EN
GENERAL EXPLANATION
About this manual
This manual gives the basic instructions for operating this DVD player.
Some DVD discs however are produced in a way that requires specific
operation or allows only limited operation during playback. In these cases the
player may not respond to all operating commands. When this occurs,
please refer to the instructions in the disc inlay. When a “ “ appears on
the screen, the operation is not permitted by the player or the disc.
Remote control operation
Unless otherwise stated, all operations can be carried out with the remote control. Always
point the remote control directly at the player, making sure there are no obstructions in the
path of the infrared beam.
When there are corresponding keys on the main unit, they can also be used.
Menu navigation
Your player has an intuitive menu navigation system to guide you through various settings
and operations.
Use the function keys to activate / disable relevant operations.
Use
5634
to browse through menus.
Press ENTER key to confirm your selection.
BASIC FUNCTION
Switching on for OSD language setup
Slide the POWER switch to ON to switch on the player.
Press SETUP for the setup menu.
Select General Setup Page and press ENTER .
Scroll and select OSD Language and
press
8
to select from OSD language options.
Select your preferred language and press ENTER.
Loading discs and switching on
Press OPEN to open the disc door.
Insert your chosen disc, label side up (also when a double
sided DVD disc is inserted). Make sure it is sitting properly
in the correct recess.
Gently push to close the door.
Slide the POWER switch to ON to switch on the player.
TIP
A normal mechanical noise is heard during playback.
Playing a DVD disc
After switching on, inserting the disc and closing the door, playback starts automatically.
The screen shows the type of disc loaded. The disc may invite you to select an item from a
menu. Use the
5634
keys to highlight your selection, and press ENTER.
Note: Since it is usual for DVD movies to be released at different times in different regions of the
world, all players have region codes and discs can have an optional region code. If you load a
disc of a different region code to your player, you will see the region code notice on the screen.
The disc will not play, and should be unloaded.
•
•
•
•
•
•
1.
2.
3.
4.
5.
1.
2.
3.
4.
Summary of Contents for PDX 702
Page 56: ......
