ENG
ENG - 33
BT - CONNECTING TO SPEAKER/HEADPHONE
This device can connect to Bluetooth speaker and headphone that
supports A2DP, AVRCP profiles.
Turn on/off Bluetooth
Select “BT” on main menu. Press [Play/Pause] to enter,
Select “BT Control” and press [Play/Pause].
Press [Backward/Forward] to select “Turn BT on” or “Turn BT off” and
press [Play/Pause] to turn on or off.
Pairing device
Set “Pairing mode” of Bluetooth speaker or headphone.
Go to “Search Device” and press [Play/Pause] to show “Searching…”
message. Wait until this message disappears.(Time for searching device
depends on number of devices nearby and it can take up to 1~3 minutes
depending on the environment).
Note
Refer to user’s manual of Speaker or headphone for pairing modes.
Connecting/Disconnecting/Unpairing device
Go to “Device’s list” and press [Play/Pause] to see list of devices.
Select desired device and press [Play/Pause] to show pop-up menu.
Bluetooth Devices Connected : select “Connect” and press [Play/Pause]
to connect.
Disconnecting device : select connected device and press [Play/Pause] to
show pop-up menu and select “Disconnect” to disconnect.
Bluetooth Devices Unpairing : select “Unpairing” and press [Play/Pause]
to unpair.
Note
If device is not shown on “Device list” then go back and follow the steps
from “Pairing device”.
BT - BLUETOOTH MUSIC PLAYER
Select “All Music” on Bluetooth menu and press [Play/Pause] to play.
When using Bluetooth to play music, press [M] to show pop-up menu
shown below.
Off: Close the EQ mode
Rock: Rock mode of EQ mode;
Funk :Funk mode of EQ mode
Hip hop: Hip hop mode of EQ mode
Jazz: Jazz mode of EQ mode
Summary of Contents for MXM 421 BT
Page 48: ......
