EN - 37
EN
CONNECTION
1.
Connect the power cord (24) to AC outlet
2.
When you first plug the unit into the mains, the LCD display (7) will show “0 : 00 ”.
3.
Turn on the unit by ON/OFF/Volume knob (13), if the LCD display (7) is on with backlighting,
it means the power supply is normal. Now your system is ready to play the music.
SETTING THE CLOCK
1.
Set unit in standby mode.
2.
Press the “Mem/Clk-adj” button (17) twice, the display will start flashing. Press Skip/Tuning
or button (5/11) to select the appropriate area hour format(12hr/24hr)
3.
Press “Mem/Clk-adj” button (17) again, the first second digit of “0” is flashing. or button
(5/11) to set the correct hour. Press ”Mem/Clk-adj” button (17) to store the correct hour.
4.
The third fourth digit of “00” is flashing, press the or button (5/11) to set the correct
minutes. Then press “Mem/Clk-adj” (17) to store the correct minute.
The pre-set time will be re-set completely if disconnecting the main power supply.
You are recommended to switch the system into standby mode for convenience usage.
LISTENING TO RADIO
Manual tuning
1.
Turn on the unit by press On/Off button (13) and rotate the Function knob (4) to select
“Tuner” mode.
2.
Tune to the required station by pressing the Tuning up/down button (5/11)
3.
Adjust volume knob (13) to the desired volume level.
Auto tuning
1.
Rotate Function knob (4) to select “Tuner” mode.
2.
Press and hold the Tuning button (5/11) for 1-2 seconds and then release.
3.
The unit will start seeking automatically and stop until a radio station is reached.
4.
Repeat step 2 until the desired radio station is being reached.
5.
Adjust volume knob (13) to the desired volume level.
Preset stations
You can store up to 20 radio stations in the memory.
1.
Set to tuner mode.
2.
Turn to the desired radio station by “manual” or “auto” tuning method.
3.
Press the “Preset/Mem/Clk-adj” button (17) to enable program state & “Mem” indicator
preset station number is flashing on LCD (7)
4.
Press “Tune up/down” button (5/11) to select the desired station memory for storage.
5.
Press “Preset/Mem/Clk-adj” button (17) again to confirm the setting.
6.
Repeat step 2 to 5 to store other stations.
7.
To return normal tuner mode, leave keys free.
8.
Press the Preset/Mem/Clk button (17) once by once to recall the preset memory.
•
The pre-set memories will be cancelled completely if disconnecting the main
power supply. You are recommended to switch the system into standby mode for
convenience usage.
•
There are 10 seconds for program state, after 10 sec. This state would resume to normal
tuner mode automatically.
•
You can overwrite a present station by storing another frequency in its place.
Summary of Contents for MSG 262 BTU
Page 56: ......