EN - 10
Thank you for purchasing our product. For optimum performance and safety, please read these
instructions carefully before operating the product. Please keep this manual for future reference.
WARNING
HIGH VOLUME MAY AFFECT
YOUR HEARING.
FOR TRAFFIC SAFETY, DO NOT
USE WHILE DRIVING
OR CYCLING.
1. SPECIFICATION
Frequency response 20 Hz - 20 kHz
Bluetooth v 4.0 + EDR
Impedance 32 Ω
Charge voltage
5 V
Power to bear 30 mW
Charge current 100 mA
Sensitivity 105 ± 3 dB
Battery capacity 400 mAh
Distortion ≤ 1 % at 1 kHz
Life time ≥ 12 Hours
Speaker material. NdFeB
Standby time ≥ 180 Hours
Speaker spec.. ø 40 mm
Charge time ≤ 4 Hours
Mic. freq. response 100 Hz - 16 kHz
Temperature 10 °C - 40 °C
Mic. sensitivity - 42 ± 3 dB
Weight (approx.) 242 g
2. BUTTON, INTERFACE, SWITCH
1. Microphone
2. LED indicator
3. AUX IN
4. Charge port
5. Track back / Volume down
6. Play / Pause
7. Track forward/ Volume up
Track back / Volume down
•
Press to play previous track.
•
Press and hold to lower volume.
Play / Pause button
•
Press and hold to turn the headphone on and off.
•
While playing music, press once to pause music, press again to play music.
•
Press to answer a call, press again to end a call.
•
Press twice to redial the last call, press again to cancel the dialing.
Track forward / Volume up
•
Press to play next track.
•
Press and hold to raise volume.
NOTE: Pressing and holding the volume up and volume down buttons only control the volume of the headphone.
Device volume should be adjusted separately.
3. BLUETOOTH
1. Press and hold the Play / Pause button until you hear a sound. The LED indicator will flash
between blue and reel.
NOTE: Once the LED is flashing blue and red, you can connect your device to the headphone via Bluetooth.
2. Open the settings on your device (Bluetooth must be enabled).
3. Select
GoGEN HBTM81BL
from the devices list.