Gogen BS 250 B, User Manual

Page: 16 / 24

EN - 14
OPERATION
Get Started
1) Long press the On/Off Switch to the ‘On’ mode. The Speaker will prompt a signal to indicate that the
Speaker is started.
2) Press On/Off/Mode button to select to play music in either the Bluetooth Mode or AUX Mode. Follow the
individual instructions in the paragraph “Bluetooth Mode” or the “AUX Mode”.
3) After operation, long press the On/Off Switch to the “Off” mode to turn off the Speaker.
Bluetooth Mode
1) The Indicator Light will flash quickly in blue to indicate that the Speaker is ready to pair via Bluetooth.
2) Start the Bluetooth function on your (e.g. phone) and begin searching for Bluetooth units.
3) Select “GoGEN BS250B” from the list of found Bluetooth units.
4) After a successful pairing, the speaker will prompt a signal and the Indicator Light will illuminate in blue.
5) Control the playback via the buttons of the Speaker and your phone. Press the volume buttons once to
decrease/increase the volume. Press and hold the “+/-”-buttons to go to previous/next song.
Note: If you receive a call during playback, press the Call Button to answer. Press the Call Button again to
end the call, the playback will be resumed.
6) To disconnect from the Speaker, press and hold the Call Button for 2 seconds. The Speaker will prompt a
signal to indicate that the Bluetooth pairing has been disconnected.
AUX Mode
1) Insert the included AUX Cable into the AUX Input.
2) Connect the other end of the AUX Cable to the AUX Input of your (e.g. phone).
3) The Indicator Light of the Speaker will flash and the Speaker will prompt a signal to indicate that the AUX
Cable is connected.
4) Start and control the playback on your phone.
5) To disconnect from the Speaker, turn off the playback on your phone and disconnect the AUX Cable from
the Speaker. The Speaker will prompt a signal to indicate that the AUX Cable has been disconnected.