7
Front Panel Controls
Manual Device Selection
Press the
Input Select
button to switch between the 4
source inputs, in order Miracast/Airplay, PC1, PC2, and
PC3. The Input LED corresponding to the active source
input will illuminate Green.
Auto Switching Mode
Hold down the
Input Select
button for minimum of 3
seconds to enable auto switching mode.
•
The switcher will switch to the next active input in
order Miracast/AirPlay, PC1, PC2, PC3
•
New input: The switcher will automatically select
the new input once detecting a new input
•
Shutdown: When power is restored to the switcher,
it will automatically connect to the input that was
active before shutdown
•
Source removed: When an active source is removed,
the switcher will switch to the next active input in
order AirPlay/Miracast, PC1, PC2, PC3
•
In auto switching mode, the input source also can
be switched by the manual switching steps
•
Press and hold down the Input Select button at least
three seconds again to exit auto switching mode,
the input source will not change.