gofanco Switch41-HD20, User Manual, Page: 11 / 20

11
Control Software Interface
Set the COM port, Baud rate, data bit, stop bit,
and parity. Enter commands into the Command
Sending Area.
RS232 Commands
Default settings: Baud rate: 9600, Data bit: 8,
Stop bit: 1, Parity bit: none.
Notes
• In Commands column, "["and"]" are
included for easy reading and do not need
to be typed in the actual command string
• End the command string with the ending
symbols "." or ","
• Type carefully, the commands are case
sensitive
• All commands must end with <CR><LF>