®
PRO-FiberIP
Receiving unit PRO-FiberIP-RX
8
1.
+5V DC:
Connect to a 5V power supply unit
2.
HDMI OUT:
Connect to a display source with an HDMI male-male cable
3.
Status LED:
Lights up when the device’s firmware is read
4.
Signal LED:
Lights up when the source is connected/detected
5.
SFP IN:
Connect a duplex, LC terminated multimode fiber cable
6.
Ethernet Port:
Ethernet control port
7.
RS-232:
Connect to serial port device with a DSUB-9 male-male or male-female
cable here
8.
EDID Button:
To learn EDID from display
9.
Transmission Status LED:
Lights up when 10Gb/s Ethernet frame rate data is trans
-
mitted
7
8
9 10
11
12
13
10.
Receiving Status LED:
Lights up when 10Gb/s Ethernet frame rate data is received
11.
Audio OUT:
Connect an audio output device (e.g. speaker or headphone) here
12.
IR Receiver:
Infrared 3.5 socket for IR receiver extension cable
13.
IR Blaster:
Infrared 3.5 socket for IR blaster extension cable
Front Panel
Rear Panel
2
3 4
6
5
1
