22
PC Control via Router
Figure 12: Router Connection
Hardware Installation
1.
Connect the TCP/IP port of the Matrix Switcher to
the Ethernet port of the PC with a network cable.
2.
Set the PC's network segment to the same as the
Matrix Switcher. Please write down the PC's orignal
network setting because you will be using them
again later.
3.
Set the Matrix Switcher to the same network segment
as the Router.
4.
Set the PC's network settings to the original settings.
5.
Connect the Matrix Switcher and PC to the router.
6.
You are now able to control the Matrix Switcher via
GUI over the router.
Summary of Contents for Matrix44-HDBT
