6
Hardware Installation
1.
Power off all devices including your HDMI source
and HDMI display(s).
2.
Connect your PC's HDMI output connector to the
Transmitter's HDMI In connector with an HDMI
cable (HDMI cable not included).
3.
Connect the Transmitter's USB port to the PC's USB
port using the included USB Type-A to Type-B
cable.
4.
Optional: Connect an HDMI display to the
Transmitter's HDMI out connector with an HDMI
cable (HDMI cable not included) for local
monitoring of the HDMI signal.
5.
Plug your CAT5e/6 cable between the Transmitter's
RJ45 Output and Receiver's RJ45 Input, if needed,
connect the Transmitter and Receiver(s) to a
dedicated Gigabit network switch using CAT cables.
6.
Connect your HDMI display to the Receiver's HDMI
out connector with an HDMI cable (HDMI cable not
included).
7.
Plug your keyboard and mouse into the USB ports
of the Receiver (RX) unit(s). Optional: For One-to-
Many connection, plug a keyboard and mouse into
each receiver unit.
8.
Plug the included power adapters into the
Transmitter's power jack and Receiver's power jack,
then plug the power adapters into a reliable power
source.
9.
Power on all connected devices.
10. The KVM extender is ready for use.
