5
Figure 2: Transmitter (TX)
Link LED Reset
•
Link LED:
Turns red when powered. Turns blue when
there is an HDMI signal detected
•
Reset:
Press to reset if HDMI Extender doesn't work
properly
•
IR Out:
Infrared 3.5mm socket. Plug IR Blaster extension
cable here. See instructions on page 7.
•
RJ45 (1):
Link to Receiver 1's RJ45 via a Cat5e/6 cable
•
HDMI In:
Connect your HDMI source here with an HDMI
cable (cable not included)
•
RJ45 (2):
Link to Receiver 2's RJ45 via a Cat5e/6 cable
