5
Figure 2: 1x4 HDMI 1.4 Splitter/Extender Rear Panel Layout
1
HDMI In
: Connects to your HDMI source
2
Outputs
:
•
HDMI Loopout
: Connects to a local HDMI display
•
CAT6/7 Out
(1-4)
: Connects to the CAT6/7 In of
the CAT6/7 Receivers using a CAT6/7 cable. It
supports PoC to power the receiver over CAT cable.
The orange LED illuminates when and HDMI signal
is detected. The green LED illuminates when
powered on
3
IR In
: Five 3.5mm IR input jacks for connecting the
IR Receivers
•
IR All In
: Connects to an IR Receiver cable. Sends
IR signals to all CAT6/7 Receivers to control all
display devices
•
IR In (1-4)
: Connects to an IR Receiver cable. Sends
IR signals to the respective CAT6/7 Receiver to
control the display device
4
Control
:
•
IR Out
: Connects to an IR Emitter cable. Receives
IR signals from the CAT6/7 Receivers to control the
source device
•
FW
: USB Type-A port for firmware update
