7
Hardware Installation
1.
Power off all devices including your HDMI source
and HDMI display(s).
2.
Connect your HDMI source device to the HDBaseT
Splitter's HDMI Input connector with an HDMI
cable (HDMI cable not included).
3.
Connect your CAT cable between the HDBaseT
Splitter and HDBaseT Receiver.
4.
Optional: Connect an HDMI display to the HDMI
output of the HDBaseT Splitter using an HDMI
cable (HDMI cable not included).
5.
Connect your HDMI display to the HDBaseT
Receiver's HDMI Output connector with an HDMI
cable (HDMI cable not included).
6.
Optional: Connect the IR Receiver Extension Cable
and the IR Blaster Extension Cable to the IR interface
port. This connection is needed only if you need
to control your HDMI devices from the remote
location. See IR Control, on page 11 and 12, for
proper IR connection.
7.
Plug the included power adapter into the HDBaseT
Splitter's Power Jack, then plug the power adapter
into a reliable power outlet.
8.
Power on your HDMI source device and HDMI
display. The extender is ready for use.