5
Product Layout
Transmitter (TX) Front and Rear Panel
1.
HDMI In
: Connect to your HDMI source
2.
EDID
: EDID selector switch
•
RX
: Slide the switch to the left to copy the
EDID from the HDMI display connected to
the Receiver's HDMI Out
•
TX
: Slide the switch to the right to copy the
EDID from the display connected to the
Transmitter's HDMI Out (Loopout)
3.
HDMI Out
: Connect to an HDMI display
for local monitoring of the remote display
4.
IR Out
: Connect to the IR Blaster cable.
Point the IR eye at the source device's IR
window
5.
Power LED
: On when the TX is powered on
1
2
3
4
5 6 7
8
Figure 1: Transmitter Front and Rear Panel Layout
