gofanco EthSwitch24P, User Manual, Page: 4 / 16

4
Figure 2: Rear Panel Layout
Product Layout
Figure 1: Front Panel Layout
1 RJ-45 Port (x24)
Connects to your network using
CAT cables
2 Speed LED (x24) Network speed
3
Link/Activity LED
(x24)
On: CAT cable is connected and
linked sucessfully to the network
Blinking: Data transmission is
detected
4 Reset
Press for 5-10 seconds to restore
factory default settings
5 System LED Blinking: Normal operation
6 DIP Switch Do not change switch position
7 DC Jack Disabled, do not use
8 Power Jack Connects to the power cable
9 Eth GND Grounding (cable not included)