5
Hardware Installation
Important:
If the source DP output doesn't support DP 1.2,
the Multiple Stream Transport function will be disabled and
this hub becomes a Splitter, mirroring your video source
across all displays.
1. Power off all devices you plan to connect to the unit.
2. Connect the unit to your PC's DisplayPort connector.
3. Connect your DisplayPort monitors to the unit's
DP
outputs
with DisplayPort cables (not included).
4. Connect the unit's
power jack
to PC's USB 3.0 port for
power source with the included cable.
5. Power on all of the connected devices.
6. It is ready for use.
Application
Add 4 external monitors to maximize productivity.
Figure 2
