Figure 3
Headset Right Side View
2. Powering the headset ON and OFF
2.1 To turn on BT function:
Press down (about 3 seconds) MFB until the LED flashes blue.
2.2 Pairing Mode:
Press down (about 5 seconds) MFB until the LED flashes red/blue. (After about 3
seconds, the LED flashes blue [standby]; keep the button pressed until the LED
flashes red/blue.) Important: You cannot go from standby mode to pairing mode.
You must turn off the BT function, and then press down MFB to be in pairing
mode.
2.3 To turn off the BT function
Press down (about 5 seconds) MFB until you hear a beep. Then release MFB.
The LED flashes red five times and the BT function turns off.
