GBDA60 User Guide
1. Introduction
This document specifies the ways for simple use to GBDA60 .
2. User interface tables
2.1 Press
Function
GSH300
GBDA60
Button
Power On
/
Off
Long-press (2s) PAP until blue
LED flashes
Pairing Pairing
Off
Very-long-press (5s) PAP until
LED flashes blue/red
Initiate
connect
On and no AV
connect
On and in Standby
state
Short-press (1s) PAP
Power Off
/
On
Very-long-press (5s) PAP until
red LED flashes
Note
:
A Short Press is assumed to be any button press less than or equal to
1
seconds. A
Long Press is assumed to be any button press longer than 2 seconds. See the following
tables for detailed press-functionality descriptions
2.2 LED
Note :
Full battery voltage has been set to 3.7V
Low battery voltage has been set to 3.3V
Shutdown voltage has been set to 3.0V
To temporarily return from shutdown point change battery
GBDA60 State
Blue LED
Red LED
Power off
OFF
OFF
Pairing mode
Blue LED and Red LED
flash by turns
Red LED and Blue LED
flash by turns
Pairing successful
Flash 3 times
OFF
Standby(no audio channel)
Flash 1 time every 2s
OFF
Active mode (audio
channel open)
Flash 3 times in 500ms,long
off 2s
OFF
Standby(Low battery)
Flash 1 time every 2s
Flash 1 time every 5s
Active mode(Low battery)
Flash 3 times in 500ms,long
off 2s
Flash 1 time every 5s
Charging mode
Across to the status
On until charging is over
