1 Introduction
G PCIe 6281
1
1 Introduction
1.1 Notes on this document
This document applies only to the device type
G PCIe 6281
. Any handling of the device requires the exact knowl-
edge and observance of this manual. The operational safety and the function of the device can only be guaran-
teed if both the general safety and accident prevention regulations of the legislator and the safety instructions in
the manual are observed.
The manual is part of the product. Please make sure that all persons who operate the device have
read and understood the manual. Keep the manual in a safe place so that it can be used whenever
needed.
This guide highlights some important comments as follows:
Symbol
Description
Warning
that indicates risk situations and dangers. Disregard can lead to life-threatening situa-
tions.
Information
that indicates certain aspects or is important for a particular topic or goal.
Tip
that gives useful hints or recommendations.
Table 1.1 Symbols
1.2 Intended Use
The
G PCIe 6281
is a programmable, intelligent multibus controller with various communication interfaces for
automotive and general control technology. Typical applications are:
•
Communication with various bus users via CAN/ CAN FD, LIN/ K-Line, FlexRay or Automotive Ethernet
for data acquisition and signal control
•
Residual bus simulation and test of complex control units
•
Application of transport and diagnostic protocols, network management, XCP, SecOC etc. directly on
the hardware
•
Flashing of control units
If you use the device for any purpose for which it is not intended, the
GOEPEL electronics GmbH
can not be held liable for resulting damage.
The device is intended for indoor use only and to be used only at an ambient temperature of 0 ° C - +45 ° C. It
must not be exposed to extreme temperatures, temperature fluctuations, heating and cooling systems, direct
sunlight, high levels of dust, vibration and impact, extreme humidity or moisture.
The device is only to be used in a technically perfect condition as well as in accordance with its intended use, in
a safety-conscious and hazard-conscious manner, observing the operating instructions! In particular, faults that
may affect safety must be rectified immediately!
