2
| Deutsch
9
| English
www.goebel-group.com
2. Preparation of the tool
Make sure that you remove the battery from the lockbolt setter before replacing the
wearing parts (mouthpiece, clamping jaw sleeves and the three clamping jaws),
otherwise there is a risk of injury! Choose a mouthpiece that corresponds to the
specification of the lockbolt. The procedure for replacing the components is shown in
the following illustration:
Before putting the lockbolt setting tool into operation, please read the following important instructions carefully.
Make sure that the battery has been removed from the tool as shown in figure
①
In
the order shown above:
②
loosen the screw cap with the wrench in the direction of
the arrow. Now you can replace the screw cap, the mouthpiece, the jaw sleeve and the
3-jaws according to
③
Once the process is complete, screw the screw cap back on
according to
④
using the wrench. Now you can reinsert the battery.
①
②
③
④
