Godrej WT EON 650 PF, Service Manual

Page: 6 / 37

Godrej & Boyce Mfg Co Ltd, HO Service, Mumbai SM 2073R -
Page
6 of 37
Safety precautions
To minimize the risk of personal injury or property damage it is important that the following safe
servicing practices be observed.
1) Read carefully the instruction booklet supplied with the Washing machine from time to time. Be
sure you are operating Washing machine properly.
2) Know the location of customer's Washing machine circuit breakers or fuses.
3) Before servicing the Washing machine, UNPLUG the power cord before performing any repairs
or removing any panel. Note Except for electrical & partly mechanical performance testing, none
of repairs require electrical power.
4) Be careful when handling Washing machine rear panel and access panel, parts or any
components, which may, have sharp edges. Avoid placing your hand into any area of the
Washing machine, which can’t first visually be inspected for sharp edges.
5) Always use the correct tools for a job and make sure tools are in good condition. Worn, faulty
and misused tools can cause accidents.
6) Never interfere with or bypass the operation of any switch, component or feature of the Washing
machine.
7) Use only replacement parts of the same size and capacity as per the list of parts. If you have any
questions contact our branch.
8) When replacing any component, be sure any green ground wires are connected securely in their
original position to avoid danger of shock or short circuit.
9) Before connecting the power supply, make sure no uninstalling wires or terminals are touching
the cabinet. Electrical wiring and all grounds must be correctly reconnected and secured away
from sharp edges, components and moving parts. All panel and covers etc. should be reinstalled
before the Washing machine is plugged in.
10) The line cord must be plugged into a grounded, three-pin plug. Never cut or remove the
third
(ground) or top pin from the power cord plug.
11) Do not substitute ordinary wire for any internal wiring of Washing machine. The wire must be
able to carry heavy current and can be subjected to heat. It is very important that all connection
is tight and secure.
12) Make an insulation test, after the Washing machine is repaired, to protect the customer from
being exposed to shock hazards. (Value to be not less than 1M

)