Godrej WF EON 700 PASE User Manual Download Page 6

Page: 6 / 76

CHAPTER -1: BEFORE USING THE APPLIANCE
Correct Use

• Please read the user's manual carefully.
• The appliance is designed for domestic use only. Using

the appliance for commercial purpose will qualify as
product misuse and may void your warranty.

• Keep your pets away from your machine.

• Please check the packaging of your machine before installation, and the outer

surface after the package is opened. Do not operate damaged machines or
machines with opened package.

• Have your appliance installed by authorized service personnel only. Any

interference to your machine by anyone other than authorized service
personnel shall cause your warranty to be void.

• Use your machine only for laundries that have been specified as suitable for

washing by the manufacturer.

• Before operating the washing machine, remove the 4 transportation

screws and rubber spacers from the back of the machine. If the screws
are not removed, it may cause heavy vibration, noise and product
malfunction which may void the warranty.

• Your machine is not covered under warranty for faults caused by any kind of

external factors (pesticides, fire, etc.).

• Please do not throw away this user manual; keep it for future reference. You or

somebody else might need it in the future.

Note: Machinery specifications may vary depending on the product
purchased.

Summary of Contents for WF EON 700 PASE













































































Search results

Summary of Contents for WF EON 700 PASE

Reviews:

Related manuals for WF EON 700 PASE

Brands by name

Popular brands

Godrej WF EON 700 PASE, User Manual

Search results

Summary of Contents for WF EON 700 PASE

Reviews:

Related manuals for WF EON 700 PASE

Brands by name

Popular brands